It scans one code at a time to find out the correct remote code that works with your remote to program the control. If you see the error then you have to go to the step2 again and start the auto search again. Required fields are marked *. You just need to enter the code from the list and I am sure that after using the above straight forward process. You need to press the button of the POWER if your device turns off. Now press button of the “Setup” for the 4 seconds. • Operate up to 4 types of devices including TVs (TV), DVD players (DVD), VCR players (VCR), satellite receivers (SAT), AUX, etc. Make sure that if you will not press any button then after 10 seconds, the remote will exit all the setup. As through the auto search, you can easily search the codes as all the codes are stored in the remote. indicator stays on. 5). 2). For every device (TV, DVD, SAT, AUX), you have a repeat this process in the system of your entertainment. You need to examine that the device operates as per your desire. So just to make life easier, you can use the Magnavox universal remote codes. Press and release the desired mode button (TV, DVD, etc.). You have to read the below steps just to start the search of the auto code. 0110, 0115, 0116, 0123, 0126, 0040, 0044, 0058, 0086, 0091, 0018, 1053, 1056, 1057, 1059, 1060, 1061, 1083, 1004, 1007, 1018, 1047. Direct Philips Magnavox Universal Remote Code Entry PM335. By using the button of the remote, you have to enter the valid code. Your email address will not be published. 6). 3). 1053, 1056, 1057, 1059, 1060, 1061, 1083, 1004, 1007, 1018, 1047, 2245, 2293, 2318, 2320, 2321, 2327, 2002, 2018, 2089, 2237, 2241, 3153, 3183, 3190, 3206, 3211, 3016, 3036, 3051, 3061, 3128, 3152, In case, you are searching for the easy steps just to enter the code at your device then you landed at the best post because below, here you will get the steps that you need to follow for the direct code entry. if your code is correct then your device will turn off, means you programmed your device successfully with remote. In case, it does, then there is no programming required. In case, your device does not turn off then you have return towards step3 and enter the next code from the list.You have to do this process until you will find the code for your device. After that, you need to “ON” the device according to the wish that you want to control. Press and hold the Code Search button until the red. After that, Take your remote control, press the Code Search Button and hold for the 2-3 Seconds until remote’s LED light is blinking. Projector Universal Remote Codes & Instructions, RCA Home Theater Universal Remote Codes & Instructions, Samsung Blu-Ray Universal Remote Codes & Instructions, Denon Soundbar Universal Remote Codes & Instructions, JBL Soundbar Universal Remote Codes & Instructions, 0021, 0043, 0030, 0023, 0040, 0017, 0042, 0051, 0019, 0057, 0018, 0063, 0042, 0041, 0044, 0054, 0045, 0056, 0043, 0028, 0047, 0046, 0059, 0027, 0022, 0085, 0083, 0061, 0066, 0049, 0074, 0075, 0082, 0084, 0019, 0021, 0052, 0029, 0073, 0090, 0085, 0067, 0089, 0017, 0076, 0088, 0087, 0086, 0028, 0011, 0008, 0003, 0000, 0001, 0005, 0009, 0010, 0013, 0006, 0004, 0012, 0007, 0002, 0017, 0001, 0003, 0004, 0010, 0011, 0013, 0005, 0006, 0000, 0012, 0007, 0008, 0017, 0009, 0002, 0006, 0007, 0001, 0003, 0002, 0000, 0005, 0011, 0012, 0017, 0009, 0010, 0004, 0008, 0013, 0041, 0079, 0048, 0023, 0072, 0018, 0080, 0020, 0078, 0067, 0081, 0057, 0034, 0051, 0016, 0017, 0025, 0027, 0032, 0062, 0066, 0067, 0068, 0069, 0070, 0071, 0074, 0091, 0019, 0057, 0040, 0051, 0030, 0021, 0017, 0023, 0018, 0043, 0042, You have to make sure that the batteries of the remote are properly working then, Now with the lit of the button, you need to point the Magnavox universal remote at the TV side and need to enter the code of the digit which you ave have to, Just for the verification of the Magnavox remote codes, you have to press the.